Are You Installing Double Glazing in Your Existing Window Spaces?
Often when installing double glazing in the existing window spaces you can end up with blinds that no longer fit within the window frame. Usually by around 30mm.
If you have either Roller Blinds or Faux Wood Venetian blinds, they can be shortened to fit the new frame. Here at Curtain Clean we can do this for you.
We can either collect the blinds from your house or you can bring them into our workshop.
The information that we need is the measurement between each side of the window.
As sometimes windows are not parallel, please measure this about 50 mm form the top of the frame. See diagram. Please write this down for us.
The cost to cut down each blind starts at $50.00 depending on the size of the blind.
We also can clean and repair your blind at the same time.
We can record your blind if needed and we can replace cord locks or tiler mechanisms should that be needed.
Replacement slats may be available for broken slats. (Depending on the availability of the slat material that matches.)
For more information please email Curtain Clean at; sales@curtaincleaning.co.nz or call Curtain Clean on 075790501 or 08005790501.
Poll: Is the increase in disability parking fines fair?
In October, the fine for parking in a designated mobility car park without a permit has jumped from $150 to $750—a 400% increase!
The goal is to keep these spaces open for those who truly need them. Do you think this big increase in the fine is fair? Share your thoughts below.
-
89.4% Yes, it's fair
-
9.8% No, it's unreasonable
-
0.8% Other - I'll share below
Just dough it
With three basic ingredients and a bit of creativity, you can give old containers new life with Resene testpots.
Find out how to create your own with these easy step by step instructions.
On the range
Venetian plaster finishes are on-trend at the moment, so why not recreate this look at home and cover that unsightly rangehood at the same time?
Find out how to create your own with Resene Sandtex and these easy step by step instructions.
Loading…
