
DIY Double Glazing with Insulation Film
Window insulation film works on the same principle as standard double glazing by creating a layer of still air in front of the glass that acts as insulation. DIY window insulation kits consist of clear plastic film for attaching to wooden window sashes or frames using double-sided adhesive tape. They cost a fraction of the price of double glazing yet offer good performance in reducing heat loss and condensation in your home, as well as preventing your sills and window dressings from going mouldy. You can pick up a kit from your local Mitre 10 or Bunnings.
Window insulation film is only designed to last one season, but it may remain intact for several years if your windows are in good condition and the film is undisturbed. Just be aware that adhesive tape used on the film may leave a stain if you leave it on for longer than one season.
Tips for installing
Installing DIY window insulation film is relatively easy – you only need a pair of scissors and a hair dryer.
• Make sure your window frames are dry and the paint is in good condition to avoid condensation forming inside the air gap.
• For wooden windows, applying a bead of sealant like silicone along the glass edge will further reduce the risk of moisture creeping into the air gap.
• Make sure your window pane is clean and streak free before putting the insulation up.
Step 1: Clean the Window
Clean the window thoroughly with an ammonia-based window cleaner and wipe it dry using a squeegee. Make sure that all of the window cleaner is wiped off, as it will dissolve the adhesive on the window film.
Step 2: Wet the glass with a light spray of water and baby shampoo
Fill a spray bottle with water and add a couple of drops of baby shampoo. Spray the mixture onto the window. This mixture helps the film stick to the window but still lets you slide the film around so you can fit it properly into the corners before the mixture dries.
Step 3: Measure and trim the film to size
Measure the window to see how large an area you need to cover, allowing at least two centimetres overlap for all four sides. Roll the window film out onto a flat horizontal surface and trim to size. Before you put the film on the window, start peeling the backing off the sticky side of the film. Use masking tape on both sides of one corner to get the peeling started.
Step 4: Put the window film onto the window
Once you’ve peeled off the top five to ten centimetres of backing, move the film up to the surface of the window. Start by putting the top two corners in place. Once the film is sitting in a good position you can slowly start to take the rest of the backing off.
Keep reading: www.curtainclean.co.nz...


Who’s the riddle master around here?🏆🥇Let’s find out!
If Teresa's daughter is my daughter's mother, what am I to Teresa?
Do you think you know the answer? Don't spoil it for your neighbours! Simply 'Like' this post if you know the answer and the big reveal will be posted in the comments at 2pm.
Want to stop seeing these in your newsfeed?
Head here and hover on the Following button on the top right of the page (and it will show Unfollow) and then click it. If it is giving you the option to Follow, then you've successfully unfollowed the Riddles page.


For a bit of fun, neighbours.
Have a good think about it, and let us know...
If you could invent one piece of technology to make life easier, what would it be?
Comment below with what you think would be a handy new invention - it may even already exist!


Caution around driveways
Police are asking people to pay extra attention to driveway safety, after a number of incidents recently involving children being harmed.
Driveways can be extremely dangerous, and people need to do everything they can to ensure they keep themselves and others safe, especially where children are present.
Children move around quickly, and often won’t be seen as you are reversing down your driveway.
Always check your driveway before driving in or out, and make sure you know the whereabouts of any children.
Please use your reversing camera if your vehicle has one installed.
Alternatively, ensure all children not in the vehicle with you are accounted for.
If another adult is at the property, make them responsible for ensuring children are well clear of any moving vehicles.
If there are no other adults present, have a ‘safe spot’ for children to stand and wait for the vehicle to stop moving.
This should be somewhere in view of the driver.
Check your blind spots often, and if you can no longer see a child, stop your vehicle and move them somewhere safe before you continue driving.
If your driveway is close to the children’s play area, consider a fence or gates to separate the play area from the driveway.
You should also take the time to speak to your children about the dangers of moving vehicles and remind them that just because they can see the driver, doesn’t mean the driver can always see them.
Taking those extra few seconds to make sure our tamariki are in a safe space when you drive in and out of your driveway can help prevent so much heartache and trauma.
Remember they don’t understand the potential consequences.
