DIY – Terracotta Bud Vases
Take on the terracotta trend and sculpt a unique floral feature.
You will need:
- Modelling clay (air-drying or baking)
- Rolling pin
- Knife
- Straw
- Fine sandpaper
- Test pot brush
- Paint test pots (we like Resene Sakura & Resene Apple Blossom)
- Resene FX Paint Effects Medium
- Small sponge
- Cord to hang
Step one: Start by rolling out your clay about 7mm thick (A). It’s important to work on a clean, non-stick surface.
Step two: Use a knife to cut a rectangle as long as you want the main shape to be, then cut a square roughly twice the width of the rectangle and two-thirds the height (B). No matter what shape you’re making, the top piece must be wider to form a dome or pocket. The backing piece always needs to be taller and have enough height to support your flora and allow for a hole.
Step three: If using air-drying clay, dip your fingers in water and wet the edges of the clay slightly – baking clay does not require any water to seal together. Take the smaller, wider square piece and make an arc over the backing piece, bringing the sides together (C). Press the sides down so the clay bonds together, then do the same along the bottom (D), making sure you still have a curved opening at the top.
Keep reading: www.curtainclean.co.nz...
Poll: Is the increase in disability parking fines fair?
In October, the fine for parking in a designated mobility car park without a permit has jumped from $150 to $750—a 400% increase!
The goal is to keep these spaces open for those who truly need them. Do you think this big increase in the fine is fair? Share your thoughts below.
-
89.2% Yes, it's fair
-
10.1% No, it's unreasonable
-
0.7% Other - I'll share below
Are you following the water charge discussions at Hamilton City Council?
Hamilton city councillors have taken tangible steps towards a new water regime that will see a charge based on their property’s capital valuation in their rates bill for the first time next year.
The council voted unanimously on Thursday on a series of direction-setting decisions in relation to the 2024-2034 Long-Term Plan Amendments.
Poll: What do you think about our city producing school lunches for NZ?
One hundred new jobs will be created in Hamilton as the city becomes the lunchbox of the nation.
All frozen school lunches from Kaitaia to Bluff will be made in Pukete in a purpose built plant operated by The School Lunch Collective.
What do you think about our city producing school lunches for NZ? Tell us your reasons in the comments (adding NFP if you don't want your words used in print).
-
60.9% I support it
-
17.4% I don't support it
-
21.7% I'm not really bothered