Thank you for using Neighbourly
I am OPEN now and have a SPECIAL for our essential workers and our long suffering people from Lockdown. Relaxing Facial including Lash and Brow Tint and Shape for $60 ph 5706270 or email bodytreatments@xtra.co.nz
this brush is new and never used. Extention handle and soap reservoir and on/off switch
soft bristles comes complete with Nylex snap-on connector ring Andy 021981782
approx 2 cubic meters excess soil from having drains laid.
This is not topsoil. it is suitable for filling low ground or back filling behind new retaining walls.
Can deliver. Ph 0220784007
Love food but find you waste more than you'd like to? 🍎
The this masterclass with waste minimisation expert Kate Meads is definitely worth tuning into.
Learn about what Kiwi’s waste and how we can save money, the difference between 'use by' and 'best before' dates, … View moreLove food but find you waste more than you'd like to? 🍎
The this masterclass with waste minimisation expert Kate Meads is definitely worth tuning into.
Learn about what Kiwi’s waste and how we can save money, the difference between 'use by' and 'best before' dates, and how much of what we throw out can be composted or frozen for another day!
Get your tickets here
www.eventfinda.co.nz...
Upcycle a pallet and old kitchen forks to help keep garden tools organised.
Make the most of this weekend with this step by step project idea from Resene. Find out how to create this project yourself
t's about time we shared one of our best kept not-so-secrets....
A common problem with roller screens or roller blinds is that they start tracking to one side and eventually will wear away the side of the blind curtain with the threads causing a problem in the mechanism.
The reason can … View moret's about time we shared one of our best kept not-so-secrets....
A common problem with roller screens or roller blinds is that they start tracking to one side and eventually will wear away the side of the blind curtain with the threads causing a problem in the mechanism.
The reason can be that the material has stretched or has moved on the blind shaft. Things like insects or stray bits of stuff can be wrapped up in the roll as the blind is rolled up.
The first thing to do is to make sure there is no foreign objects or insects rolled into the roll and make sure the blind is attached to the roller properly. Do this by rolling the blind down to its full extent and checking.
If the sides are damaged you should make sure any loose threads etc are cleared and you can trim the damaged side with a sharp pair of scissors. To do this remove the blind from the brackets.
Many of the blinds have a spring loaded pin at the end opposite the chain. This spring is retracted by turning the knurled wheel either up or down till the spring is retracted. The blind can then be removed by lowering it and sliding it off the other bracket. The more level the blind the easier to remove from the other bracket. Sometimes it will come down leaving the drive still there. If so, all you need to do is remove the drive and replace in the shaft.
Some blinds have lift up out of bracket ends or plastic roller pins that need a small screw driver to remove.
Some blinds are a spring loaded one end and have a lift up attachment on the other end.
(If you are not sure how, Google, “taking down roller blind shades” and you will find a video for the type you have.)
Hint here, ensure the blind is rolled up before removing. Lay the blind on a table or floor and trim.
Roll the blind up again.
Reinstall the blind.
When doing that make sure that when you fit the drive end back onto the bracket, that the cover over the chain wheel is at the top so the chain can run properly (It should be in the 11 – 1 position.), and that the chain is free. The spring pin should just push up into its bracket. If it is a bit tight you can use the wheel to wind the spring in and then you can let the pin out once in position.
Roll the blind up and down several times.
If the blind is rolling to one side then you can adjust this.
Let the blind right down till you can see the where the fabric is fastened to the roll shaft.
What you need to do is to put a strip of masking tape on the roller shaft, where the material is attached, at the end that you want the blind to roll back too. i.e. the opposite end to the way it rolls across to now.
Depending on the width of the blind a strip 100-150 mm will be long enough for a blind up to a meter wide but for a wider blind you can put a strip 250-300mm long.
Try rolling up the blind and if it is still rolling to the side then you can add another strip the same size on top of the first one. Add more strips as necessary. Simple stuff to do.
Article with Pictures: curtaincleaners.co.nz...
We’re proposing ideas, potential projects and other initiatives to support growth in the city centre, Greerton, Gate Pa/Pukehinahina and Merivale. Tell us what you think about those we’re proposing and add what we’ve missed.
We are looking for someone who works nights or evening shifts in the Rotorua / Bay of Plenty area who would be happy to be interviewed and filmed while going about their duties next week. This is for a story on people who work to keep the country running while the rest of us sleep or relax at home.… View moreWe are looking for someone who works nights or evening shifts in the Rotorua / Bay of Plenty area who would be happy to be interviewed and filmed while going about their duties next week. This is for a story on people who work to keep the country running while the rest of us sleep or relax at home. Please contact senior journalist Andrea Vance at: andrea.vance@stuff.co.nz
If you've ever wanted to travel NZ, now is the time. These deals are incredible value.
By harnessing online learning to blend tech features with traditional teaching methods, students’ progress can be easily tracked and feedback can be given instantly. Read on to learn how an encouraging environment established within NumberWorks’nWords centres has been perfected and can be … View moreBy harnessing online learning to blend tech features with traditional teaching methods, students’ progress can be easily tracked and feedback can be given instantly. Read on to learn how an encouraging environment established within NumberWorks’nWords centres has been perfected and can be applied to students’ daily learning, so that when they finish their studies, they are more motivated than ever.
The freeze on tenancy terminations has impacted 'Mum and dad' landlords in ways no-one could have predicted prior to Covid-19.
Hi This is quite new but no longer required by our family. Can deliver to new home in my van . Best to be seen in person first though please Julie 576 7150 eves
Got a local business that went over and above during lockdown? Is there one you’ve really missed - or one that's brightened your day? Maybe it’s a business who just needs a helping hand at the moment...
Nominate them for a Local Like! Your shoutout could appear as an advert on Stuff, on… View moreGot a local business that went over and above during lockdown? Is there one you’ve really missed - or one that's brightened your day? Maybe it’s a business who just needs a helping hand at the moment...
Nominate them for a Local Like! Your shoutout could appear as an advert on Stuff, on Neighbourly, or in your local paper. Plus you could win a bag of feijoas (or a $100 voucher to the business you nominate).
As a nation, we recently held a moving ANZAC Day commemoration. So now is a good time to reflect on how we treat our military personnel during and after their service. It speaks volumes about who we are as New Zealanders.
Let’s not leave those who serve our country behind.
Can New Zealand … View moreAs a nation, we recently held a moving ANZAC Day commemoration. So now is a good time to reflect on how we treat our military personnel during and after their service. It speaks volumes about who we are as New Zealanders.
Let’s not leave those who serve our country behind.
Can New Zealand do more to ensure that past, present and future service people - and their whānau – are recognised and supported?
Join the conversation now at missionfeedback.co.nz
The answer: Not Directly.
Only if the curtains are actually touching or touch the window, which most don’t. It derives from and does contribute to the general humidity in the surrounds around the curtain which again contributes to the development of mould. Water on windows is mostly somewhere … View moreThe answer: Not Directly.
Only if the curtains are actually touching or touch the window, which most don’t. It derives from and does contribute to the general humidity in the surrounds around the curtain which again contributes to the development of mould. Water on windows is mostly somewhere between 75 and 100 mm from a curtain so how it hops the space to create mould is an interesting question.
I have seen curtains more than a meter from the windows and still moldy and curtains 20 years old with no mould. Not in the sun.
Moisture on windows is caused by the lower dew point of the glass. The warmer the air in a room/house the more moisture it will hold. It is a natural reaction for the moisture in the air to collect on the cool glass as the warm moist air attempts to equalize the air temperature and the glass temperature. The cooler glass sucks the heat out of the air.
Heat always travels from hot towards cold, leaving the moisture on the window and the warmth heating the glass until the outside temperature is the same as the inside temperature.
The closer together the temperature of the air and the glass the less it will happen. Indeed in the summer it works in the opposite where the higher temp of the glass heats the air in the room. This would also occur on days in the winter when the air in the house is cooler than the glass that’s heated by the sun. As soon as the temperature reverses the dew point on the glass lowers and then we have moisture on the windows. Same happens in your car.
Now without the sun or heating of some kind warming the curtains and the room, the curtains would remain at the ambient room air temperature but that’s not what happens. Heating or the sun will warm the curtains which like the air absorb the moisture from the air around them. This is also influenced by the humidity in the air at the time. If the curtains are cooler than the air in the room then any humidity will be absorbed by the curtains.
In doing so they also absorb the bacteria that is entrapped in that moisture. It important to note that that moisture can be from any source both inside and outside of the immediate vicinity of the curtains, for moisture in the air is carried by air currents that swirl around constantly, due to breeze, air temperature, movement by people and so on.
The curtains will adjust their own temperature and level of water absorbed up and down depending on the same factors, i.e. air temp, amount of heat applied to them by the sun and the amount of heat the material is able to absorb and retain and the all this is complicated by the time which curtains retain that heat and for how long.
So we have material curtains that absorb and release both heat and moisture all the time depending on the room conditions.
Thus we have curtains that essentially become mini glass houses or incubators, especially in the folds or where the sun has a high heat impact upon the material. A further compounding factor is the closeness of the material bulk to the wall. If as is mostly the case curtains are bunched against the wall, especially after being heated by the sun in the mornings, then the incubator effect is heightened. The same applies to late afternoon except that at that time the sun is intense and hotter than morning so the curtains retain more heat for longer. Midday sun is at a higher angle and so doesn’t affect the curtains so much.
The type of material also has an effect. Many older materials were natural and tended to allow more passage of air. Many of the modern materials are almost impervious to air and in the case of say taffeta’s and blackout material there is no “breathing” at all.
The use of Blackout material on many curtains has both the effect of no “breathing and it also retains an enormous amount of heat where the sun shines upon it. Put taffeta and blackout together and it’s a given that curtains and or more likely the linings will go moldy, even in rooms where there is standard ventilation.
How does the warmth affect the curtains?
As with all incubators and glass houses the warmth creates an ideal condition for bacteria to grow. Longer periods of warmth, especially where the humidity is high, such as in curtain folds, and even in the material fibres themselves encourage the growth of bacteria. Bacteria thrive in colonies and have an enormous rate of duplication, and will grow colonies that live and hibernate and create their spores that continue to reinfect and grow the new colonies.
This growth happens in the warm, mostly summer and on curtains is mostly seen as an orange-y or reddish spots. These colonies flourish and die and then regrow from the spores left in the curtains. This may happen for several years before they become easily seen.
By the time most people notice the mildew the bacteria have died, due to the cooler winter temperature and left their spores which have turned black. That’s what we see. They are hibernating mould bacteria which are responsible for the black stain seen on curtains and linings.
It would be rare for this to contaminate the curtains in a short period of time to a degree where it is very visible and usually we could expect two to three years for this to be readily visible and often longer. The black often becomes visible after winter when the cold has had its effect on the bacteria.
Where does all this moisture come from?
The air always contains moisture to a greater or lesser extent. In New Zealand, area’s such as Auckland, Bay of Plenty, Waikato and others have high levels of humidity on any given day because we are close to the sea.
Inside of a house as well as the air humidity level there are other sources of humidity.
People. People exhale moisture when breathing. Closing bedroom doors at night means that that moisture remains inside the bedroom unless there is ventilation to change the air.
En-suites which are now very popular contribute to the moisture in a house, are as do showers and cooking, especially boiling pots of water.
Un-flued Gas Heaters run on LPG are big contributors to the humidity in the room because the gas burns to produce CO2 and water aka Moisture.
Now we want to have these facilities as well as warm houses so we have created an ideal world for bacteria.
Some of the issues can be easily mitigated.
Heat pumps do not remove moisture from a house except at low temperatures whereas dehumidifiers remove the moisture from the air in the house and produce warmth in the process. Tiny ones are not much good but there are a number of larger models.(Remember your science and you will recall that the warmer the air the more moisture it holds, so warming it with a heat pump allows the air to hold more moisture from your cooking, showers etc. Dehumidifiers work by extracting that water, something the heat pump can’t/won’t do.). Using a dehumidifier means not having to install a ventilation system at more cost. Allowing for better room ventilation with cool air. Especially of the windows can be left just open to facilitate cool air inflow.
By changing the curtain rail brackets from the standard 65mm to 80 or 100mm so that the curtains are further from the walls and the windows. This allows for more air circulation around the curtains and thus less higher temperatures. Having separate blackout curtains on a different rail to the other curtains. Install a ShowerDome. In our experience roof ventilation systems and double glazing do not prevent this mildew problem but may delay its onset.
Too late? We can clean your mouldy curtains - visit curtainclean.co.nz or call us on 07-579 0501 to book in today.
© Neighbourly 2024
Loading…
